Combined sensor sounder technology provides a cost effective solution for alarm signalling saving on installation costs as there is no need for additional power supplies. Synchronised messages are transmitted through the same sensor that detects the fire.
Attention tones can be programmed either as a bell (on speech variants) or a choice of 12 standard tones
’Soft’ start option
Uniform sound distribution
Low current consumption
Fully synchronised sound patterns via the control panel
Selectable speech messages available to suit most requirements –switched on/off by the Vigilon control panel
Rich harmonic sound output using patented technique
Options for sound output:
Standard mode = 90 dB(A) @1m (typical)
Up to 98 dB(A) possible if required (turbo mode)
Dimensions (mm) d 49.6 (63.8 with base) W 117
Type
Heat Sensor Sounder
Optical Heat Sounder
Dual Optical Heat Sensor Sounder
Device Load Factor*
8-16**
8-16**
8-16**
Ingress Protection
IP30
Approx Weight
0.11Kg (0.17Kg with base)
Operating Temperature
-10oC to +50oC
Relevant Standards
EN54-3&5
CEA 4021 EN54-3&7 +5
CEA 4021 EN54-3&7 +5
Sound Output at 1m
Typically 90 dB(A)
Approvals
LPCB
LPCB pending
LPCB
* Load factors for guide purposes only. ** Higher value for ‘turbo’ mode or bell.
